Abstract
In this work, we demonstrated the alignment of polystyrene latex microspheres (diameter of 1 ~45 μm), bio-functionalized superparamagnetic beads (diameter 2.8 μm), and live cells (average diameter 1 ~2 μm) using an ultrasonic standing wave (USW) in a PDMS microfluidic channel (330 μm width) attached on a Si substrate for bio-medical applications. To generate a standing wave inside the channel, ultrasound of 2.25 MHz resonance frequency (for the channel width) was applied by two ultrasound transducers installed at both sides of the channel which caused the radiation force to concentrate the micro-particles at the single pressure nodal plane of USW. By increasing the frequency to the next resonance condition of the channel, the particles were concentrated in dual nodal planes. Migration time of the micro-particles towards the single nodal plane was recorded as 108 s, 17 s, and 115 s for polystyrene particles of 2 μm diameter, bio-functionalized magnetic beads, and live cells, respectively. These successful alignments of the bio-functionalized magnetic beads along the desired part of the channel can enhance the performance of a sensor which is applicable for the bio-hybrid system and the alignment of live cells without any damage can be used for sample pre-treatment for the application of lab-on-a-chip type bioassays.
Original language | English |
---|---|
Pages (from-to) | 1077-1084 |
Number of pages | 8 |
Journal | Biomedical Microdevices |
Volume | 14 |
Issue number | 6 |
DOIs | |
State | Published - Dec 2012 |
Bibliographical note
Funding Information:Acknowledgments This research was supported by a WCU (World Class University) program through the National Research Foundation of Korea funded by the Ministry of Education, Science, and Technology (R32-20026).
Keywords
- Alignment in a plane
- Bio-functionalized magnetic beads
- Live cells
- Micro-particle manipulation
- PDMS channel
- Ultrasonic standing wave