Fabrication of nanostructured SiC and BN from templated preceramic polymers

In Kyung Sung; Taek Su Kim; Suk Bon Yoon; Jong Sung Yu; Dong Pyo Kim

doi:10.1016/S0167-2991(03)80442-1

Fabrication of nanostructured SiC and BN from templated preceramic polymers

In Kyung Sung
, Taek Su Kim
, Suk Bon Yoon
, Jong Sung Yu
, Dong Pyo Kim

Department of Energy and Science and Engineering

Research output: Contribution to journal › Article › peer-review

5 Scopus citations

Abstract

Macroporous SiC and BN with a different degree of ordered pore arrays were prepared by infiltrating liquid precursors into sacrificial crystalline array of monodisperse colloidal silica spheres in range 70∼500nm. The polymethylsilane and polycarbosilane were used as the SiC precursors, and borazine was used as the BN precursor The silica template was subsequently etched off after pyrolysis in an argon atmosphere at 1200∼1300 °C. An alternative nanotublar morphology of stoichiometric SiC was produced using alumina membranes as templates.

Original language	English
Pages (from-to)	547-550
Number of pages	4
Journal	Studies in Surface Science and Catalysis
Volume	146
DOIs	https://doi.org/10.1016/S0167-2991(03)80442-1
State	Published - 2003

Bibliographical note

Funding Information:
D.-P. Kim and J.-S. Yu acknowledge the Korea Research Foundation Grant ( KRF-2001-005-E00033) and the Korea Research Foundation (KRF-2001-041-D00177) for financial support, respectively.

Access to Document

10.1016/S0167-2991(03)80442-1

Cite this

@article{91d67bf05e4147c281205421011bf4a8,

title = "Fabrication of nanostructured SiC and BN from templated preceramic polymers",

abstract = "Macroporous SiC and BN with a different degree of ordered pore arrays were prepared by infiltrating liquid precursors into sacrificial crystalline array of monodisperse colloidal silica spheres in range 70∼500nm. The polymethylsilane and polycarbosilane were used as the SiC precursors, and borazine was used as the BN precursor The silica template was subsequently etched off after pyrolysis in an argon atmosphere at 1200∼1300 °C. An alternative nanotublar morphology of stoichiometric SiC was produced using alumina membranes as templates.",

author = "Sung, \{In Kyung\} and Kim, \{Taek Su\} and Yoon, \{Suk Bon\} and Yu, \{Jong Sung\} and Kim, \{Dong Pyo\}",

note = "Funding Information: D.-P. Kim and J.-S. Yu acknowledge the Korea Research Foundation Grant ( KRF-2001-005-E00033) and the Korea Research Foundation (KRF-2001-041-D00177) for financial support, respectively.",

year = "2003",

doi = "10.1016/S0167-2991(03)80442-1",

language = "English",

volume = "146",

pages = "547--550",

journal = "Studies in Surface Science and Catalysis",

issn = "0167-2991",

publisher = "Elsevier Inc.",

}

TY - JOUR

T1 - Fabrication of nanostructured SiC and BN from templated preceramic polymers

AU - Sung, In Kyung

AU - Kim, Taek Su

AU - Yoon, Suk Bon

AU - Yu, Jong Sung

AU - Kim, Dong Pyo

N1 - Funding Information: D.-P. Kim and J.-S. Yu acknowledge the Korea Research Foundation Grant ( KRF-2001-005-E00033) and the Korea Research Foundation (KRF-2001-041-D00177) for financial support, respectively.

PY - 2003

Y1 - 2003

N2 - Macroporous SiC and BN with a different degree of ordered pore arrays were prepared by infiltrating liquid precursors into sacrificial crystalline array of monodisperse colloidal silica spheres in range 70∼500nm. The polymethylsilane and polycarbosilane were used as the SiC precursors, and borazine was used as the BN precursor The silica template was subsequently etched off after pyrolysis in an argon atmosphere at 1200∼1300 °C. An alternative nanotublar morphology of stoichiometric SiC was produced using alumina membranes as templates.

AB - Macroporous SiC and BN with a different degree of ordered pore arrays were prepared by infiltrating liquid precursors into sacrificial crystalline array of monodisperse colloidal silica spheres in range 70∼500nm. The polymethylsilane and polycarbosilane were used as the SiC precursors, and borazine was used as the BN precursor The silica template was subsequently etched off after pyrolysis in an argon atmosphere at 1200∼1300 °C. An alternative nanotublar morphology of stoichiometric SiC was produced using alumina membranes as templates.

UR - https://www.scopus.com/pages/publications/33747088916

U2 - 10.1016/S0167-2991(03)80442-1

DO - 10.1016/S0167-2991(03)80442-1

M3 - Article

AN - SCOPUS:33747088916

SN - 0167-2991

VL - 146

SP - 547

EP - 550

JO - Studies in Surface Science and Catalysis

JF - Studies in Surface Science and Catalysis

ER -

Fabrication of nanostructured SiC and BN from templated preceramic polymers

Abstract

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this