Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads

Cheol Gi Kim; B. C. Woo; P. G. Park; K. S. Ryu; C. S. Kim

doi:10.1109/IMTC.1994.352047

Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads

Cheol Gi Kim, B. C. Woo, P. G. Park, K. S. Ryu, C. S. Kim

Department of Physics and Chemistry

Korea Research Institute of Standards and Science

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

This paper describes the use of an array leads for the injection of AC current in noncontacting probe and of main and auxiliary currents in uniform field generation. The compensation methods of feasible errors due to imperfection of the leads are proposed in terms of effective field and correction of dimension by misalignment. The objective of further experiments is to apply the technique to the measurement of solenoid dimension for the determination of proton gyromagnetic ratio in low field.

Original language	English
Title of host publication	Conference Proceedings - 10th Anniv., IMTC 1994
Subtitle of host publication	Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	368-371
Number of pages	4
ISBN (Electronic)	0780318803, 9780780318809
DOIs	https://doi.org/10.1109/IMTC.1994.352047
State	Published - 1994
Event	1994 IEEE Instrumentation and Measurement Technology Conference, IMTC 1994 - Hamamatsu, Japan Duration: 10 May 1994 → 12 May 1994

Publication series

Name	Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference

Conference

Conference	1994 IEEE Instrumentation and Measurement Technology Conference, IMTC 1994
Country/Territory	Japan
City	Hamamatsu
Period	10/05/94 → 12/05/94

Bibliographical note

Publisher Copyright:
© 1994 IEEE.

Access to Document

10.1109/IMTC.1994.352047

Cite this

Kim, C. G., Woo, B. C., Park, P. G., Ryu, K. S., & Kim, C. S. (1994). Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads. In Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference (pp. 368-371). Article 352047 (Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IMTC.1994.352047

Kim, Cheol Gi ; Woo, B. C. ; Park, P. G. et al. / Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads. Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference. Institute of Electrical and Electronics Engineers Inc., 1994. pp. 368-371 (Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference).

@inproceedings{2867e457d13a406eaf67d38c0b6b2ca2,

title = "Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads",

abstract = "This paper describes the use of an array leads for the injection of AC current in noncontacting probe and of main and auxiliary currents in uniform field generation. The compensation methods of feasible errors due to imperfection of the leads are proposed in terms of effective field and correction of dimension by misalignment. The objective of further experiments is to apply the technique to the measurement of solenoid dimension for the determination of proton gyromagnetic ratio in low field.",

author = "Kim, \{Cheol Gi\} and Woo, \{B. C.\} and Park, \{P. G.\} and Ryu, \{K. S.\} and Kim, \{C. S.\}",

note = "Publisher Copyright: {\textcopyright} 1994 IEEE.; 1994 IEEE Instrumentation and Measurement Technology Conference, IMTC 1994 ; Conference date: 10-05-1994 Through 12-05-1994",

year = "1994",

doi = "10.1109/IMTC.1994.352047",

language = "English",

series = "Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "368--371",

booktitle = "Conference Proceedings - 10th Anniv., IMTC 1994",

}

Kim, CG, Woo, BC, Park, PG, Ryu, KS & Kim, CS 1994, Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads. in Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference., 352047, Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference, Institute of Electrical and Electronics Engineers Inc., pp. 368-371, 1994 IEEE Instrumentation and Measurement Technology Conference, IMTC 1994, Hamamatsu, Japan, 10/05/94. https://doi.org/10.1109/IMTC.1994.352047

Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads. / Kim, Cheol Gi; Woo, B. C.; Park, P. G. et al.
Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference. Institute of Electrical and Electronics Engineers Inc., 1994. p. 368-371 352047 (Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads

AU - Kim, Cheol Gi

AU - Woo, B. C.

AU - Park, P. G.

AU - Ryu, K. S.

AU - Kim, C. S.

PY - 1994

Y1 - 1994

N2 - This paper describes the use of an array leads for the injection of AC current in noncontacting probe and of main and auxiliary currents in uniform field generation. The compensation methods of feasible errors due to imperfection of the leads are proposed in terms of effective field and correction of dimension by misalignment. The objective of further experiments is to apply the technique to the measurement of solenoid dimension for the determination of proton gyromagnetic ratio in low field.

AB - This paper describes the use of an array leads for the injection of AC current in noncontacting probe and of main and auxiliary currents in uniform field generation. The compensation methods of feasible errors due to imperfection of the leads are proposed in terms of effective field and correction of dimension by misalignment. The objective of further experiments is to apply the technique to the measurement of solenoid dimension for the determination of proton gyromagnetic ratio in low field.

UR - https://www.scopus.com/pages/publications/85064690832

U2 - 10.1109/IMTC.1994.352047

DO - 10.1109/IMTC.1994.352047

M3 - Conference contribution

AN - SCOPUS:85064690832

T3 - Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference

SP - 368

EP - 371

BT - Conference Proceedings - 10th Anniv., IMTC 1994

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 1994 IEEE Instrumentation and Measurement Technology Conference, IMTC 1994

Y2 - 10 May 1994 through 12 May 1994

ER -

Kim CG, Woo BC, Park PG, Ryu KS, Kim CS. Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads. In Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference. Institute of Electrical and Electronics Engineers Inc. 1994. p. 368-371. 352047. (Conference Proceedings - 10th Anniv., IMTC 1994: Advanced Technologies in I and M. 1994 IEEE Instrumentation and Measurement Technology Conference). doi: 10.1109/IMTC.1994.352047

Error compensation in dimensional measurement of solenoid by noncontacting probe using array leads

Abstract

Publication series

Conference

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this