A study on the effects of bottom electrode designs on aluminum nitride contour-mode resonators

Soon In Jung, Chaehyun Ryu, Gianluca Piazza, Hoe Joon Kim

Research output: Contribution to journalArticlepeer-review

14 Scopus citations

Abstract

This study presents the effects of bottom electrode designs on the operation of laterally vibrating aluminum nitride (AlN) contour-mode resonators (CMRs). A total of 160 CMRs were analyzed with varying bottom electrode areas at two resonant frequencies (f0) of about 230 MHz and 1.1 GHz. Specifically, we analyzed the impact of bottom electrode coverage rates on the resonator quality factor (Q) and electromechanical coupling (k2), which are important parameters for Radio Frequency (RF) and sensing applications. From our experiments, Q exhibited different trends to electrode coverage rates depending on the device resonant frequencies, while k2 increased with the coverage rate regardless of f0. Along with experimental measurements, our finite element analysis (FEA) revealed that the bottom electrode coverage rate determines the active (or vibrating) region of the resonator and, thus, directly impacts Q. Additionally, to alleviate thermoelastic damping (TED) and focus on mechanical damping effects, we analyzed the device performance at 10 K. Our findings indicated that a careful design of bottom electrodes could further improve both Q and k2 of AlN CMRs, which ultimately determines the power budget and noise level of the resonator in integrated oscillators and sensor systems.

Original languageEnglish
Article number758
JournalMicromachines
Volume10
Issue number11
DOIs
StatePublished - 1 Nov 2019

Bibliographical note

Publisher Copyright:
© 2019 by the authors.

Keywords

  • Aluminum nitride
  • Damping
  • Electromechanical coupling
  • MEMS
  • Quality factor
  • Resonator

Fingerprint

Dive into the research topics of 'A study on the effects of bottom electrode designs on aluminum nitride contour-mode resonators'. Together they form a unique fingerprint.

Cite this